OBD2 OBDII Male to Volkswagen OBD2 Female and Normal OBD2 Female Y Cable

OBD2 OBDII Male to Volkswagen OBD2 Female and Normal OBD2 Female Y Cable
 
 
Specification

 
This is a Y cable with 3 ends of an OBD2 male plug, a replacement Volkswagen OBD2 female connector and a normal OBD2 female connector.
 
The overmolded plastic injection part at the ends of 16-Pin OBD2 OBDII female and male connectors makes the cable come out straight.

We can make different overmolds for the ends of OBD2 OBDII female and male connectors. If you don’t like the overmolds at the ends of OBD2 OBDII female and male connectors as shown in the pictures or you would like to have your own overmold with your company’s logo or you have special application requirements, we can and we have the ability to make a new overmold for you with reasonable charge. Moreover, we can even make it for free as long as the order quantity is 5000 pcs or more.

Pin assignment or pin out
 
The pin assignment or pin out can be like this:

 
As to this pin out, Pin 4 and Pin 5 of the OBD2 OBDII male and female connectors are connected together with a short wire. The black wire in the main cable is connected to Pin 4 or Pin 5. There are 9 pins wired, but there are 8 wires of 26AWG in the cable from OBD2 male plug to normal OBD2 female connector. All 16 pins of OBD2 male plug to Volkswagen OBD2 female connector are wired, so there are 16 wires of 26AWG in the cable from OBD2 male plug to Volkswagen OBD2 female connector.
 
The pin assignment or pin out can also be like this:

As to this pin out, all 16 pins of the OBD2 OBD male and female connectors are wired, so there are 16 wires of 26AWG in both cables.
 
The pin assignment or pin out can also be customized according to your needs.
 
 
Application
 
This Y cable is used to connect telematics, IoV devices, fleet management devices, OBD2 GPS trackers, OBD2 CAN programming tools, ECU tuning tools or car performance tuning tools to vehicles' 16-Pin OBD2 female diagnostic ports.

This OBD2 OBDII Y Cable allows port relocation or connection of multiple telematics or IoV devices. Take the original Volkswagen OBD2 female diagnostic port off its original location with tools if necessary and then insert the OBD2 male plug at the end of this OBD2 Y cable into the original Volkswagen OBD2 female diagnostic port. Install the replacement Volkswagen OBD2 female connector at one end of the Y ends back to the original location of the OBD2 female diagnostic port in the car. Then you can connect a telematics or IoV device to the common OBD2 female connector at the other end of the Y ends. You can also connect another telematics or tuning device to the OBD2 female connector which was installed at the original location or leave this OBD2 female connector available for diagnostic use in the future.
 
This cable can also be used to connect OBD2 diagnostic devices or scanners or fault code readers (with the appropriate software).
 
 
Sending an inquiry
 
If you haven’t found or don’t have time to look for the OBD2, 9-Pin J1939 or 6-Pin J1708 cables, adapters or connectors in our website, feel free to let us know what OBD2, 9-Pin J1939 or 6-Pin J1708 cables, adapters or connectors you need by sending an inquiry (If you have a picture, please attach it in the inquiry). We can also customize any OBD2, 9-Pin J1939 or 6-Pin J1708 cables, adapters or connectors for you.

Skype: orchard.guo (any time to contact)