Payment & Shipping Terms:
|Pins Of OBD2 Male Plug:||Copper, Nickel-plated Or Gold-plated||Terminals Of Molex 6P:||Copper, Nickel-plated Or Gold-plated|
|Insulation Resistance:||5M Ohm Min.||Wire:||26AWG, Pure Copper|
|Testing:||100% Open, Short And Miss-wire Testing||Working Temperature:||−25℃ ~ +85℃|
OBD2 to Molex,
J1962 to Molex,
OBD2 to Molex cable
OBD2 OBDII 16 Pin J1962 Male to Molex 6 Pin Female Connector Cable
|OBD2 male plug||standard|
|Pins of OBD2 male plug||copper, nickel-plated or gold-plated|
|Material of OBD2 male plug||PA66|
|Overmold of OBD2 male plug||straight|
|Molex 6P female connector||standard|
|Terminals of Molex 6P female connector||copper, nickel-plated or gold-plated|
|Material of Molex 6P female connector||PA66|
|Material of overmolded part||PVC|
|Wire||24AWG, pure copper|
|Pin assignment or pin out||customized|
|Contact Resistance||3 ohm max.|
|Insulation Resistance||5M ohm min.|
|Working Temperature||−25℃ ~ +85℃|
|Testing||100% open, short and miss-wire testing|
|Testing Voltage||DC300V 5M ohm/10ms|
The overmolded plastic injection part at the end of 16-Pin OBD2 OBDII male plug makes the cable come out straight.
The end of Molex 6P female connector can be overmolded or not, according to your needs. If the end is overmolded, the cables are more sturdy and durable. If not overmolded, the price can be lower because the raw material and labour cost is saved.
Pin assignment or pin out
The pin assignment or pin out can be customized according to your needs. If there is no need for more pins to be connected, we suggest we just connect the necessary pins you need and the price can be lower because the raw material and labor cost is lower.
This cable is used to connect telematics, M2M devices, IoV (Internet of Vehicles) devices, fleet management devices, OBD2 GPS trackers, OBD2 CAN programming tools, ECU tuning tools or car performance tuning tools to vehicles' 16-Pin OBD2 female diagnostic ports. Some telematics or fleet management devices have Molex 6P male ports. To connect these kinds of devices to vehicles, Molex 6P female connector on this cable is needed.
It is important to check whether the telematics or IoV devices can be compatible with the vehicle’s voltage (12V or 24V) before connecting them to the original OBD2 female diagnostic ports with this cable. If the telematics or IoV devices’ voltage is 12V and the vehicle’s voltage is 24V, the devices could be damaged.
Sending an inquiry
If you haven’t found or don’t have time to look for the OBD2 OBDII, 9-Pin J1939 or 6-Pin J1708 cables, adapters or connectors in our website, feel free to let us know what OBD2 OBDII, 9-Pin J1939 or 6-Pin J1708 cables, adapters or connectors you need by sending an inquiry (If you have a picture, please attach it in the inquiry). We can also customize any OBD2 OBDII, 9-Pin J1939 or 6-Pin J1708 cables, adapters or connectors for you.
Skype: orchard.guo (any time to contact)
Contact Person: Leon